Panasonic PT-LB10U User Manual

(RGB/YP

B

P

R

/NETWORK only)

This displays the type of signal
which is currently being projected.
Refer to the list on page 60 for
details on each type of signal.

sRGB is an international color
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colors in sRGB-
compatible pictres to be reproduced
more faithfully, make the following
settings.
# Press the F

F 

 or G

G 

 button to

select “PICTURE MODE”, and
then press the I

I 

 or H

H 

 button

$ Press the STD (standard)

% Press the F

F 

 or G

G 

 button to

select “COLOR TEMP.”, and
then press the I

I 

 or H

H 

 button

This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright:  I button
The picture is dark: 

H button

This adjusts the darker areas (black
areas) in the picture.
Black areas are too light:  I button
Dark areas are too solid:  H button

(S-VIDEO/VIDEO/YP

B

P

R

only)

The color is too deep: I button
The color is too pale:  H button

(NTSC/NTSC 4.43/YP

B

P

R

only)

This adjusts the flesh tones in the
picture.
The flesh tones are greenish: 
I button
The flesh tones are reddish: 
H button

To soften the picture details: 
I button
To sharpen the picture details: 
H button

This is used to adjust the white
areas of the picture if they appear
bluish or reddish.

(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised. 
To make the selected color lighter:
I button 
To make the selected color stronger:
H button

ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.

C O L O R   T E M P .     S T A N D A R D

                                [

                              H I G H

                                [

                              L O W

(S-VIDEO/VIDEO only)
To reduce flickering of still images
(vertical flicker), set “STILL MODE”
to “ON”.

NOTE:
B “AI” is disabled when “LAMP

POWER” is set to “LOW”.
(Refer to page 45.)

This should normally be set to
“AUTO”. If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting
manually to the required TV system.

T V - S Y S T E M             A U T O

                               

[

                              N T S C

                               

[

                          N T S C 4 . 4 3

                               

[

                              P A L

                               

[

                            P A L - M

                               

[

                            P A L - N

                               

[  

                            S E C A M

(S-VIDEO/VIDEO only)

NOTE:
B When set to “AUTO”, the

projector automatically
distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
PAL-M/PAL-N/SECAM signals.

NOTE:
B Set to “OFF” when playing

back moving images.

NOTE:
B sRGB is only enabled when

RGB signals are being input
(when “LAMP POWER” is set
to “HIGH” and “AI” is set to
“OFF”).