Panasonic PT-LC75E User Manual

Before asking for service, check the following points.

B The power cord may not be connected.
B The MAIN POWER switch is turned off.
B The main power supply is not being supplied to the

wall outlet.

B TEMP indicator is illuminated or flashing. (Refer to

page 42.)

B LAMP indicator is illuminated or flashing. (Refer to

page 42.)

B The lamp unit cover has not been securely

installed.

B The video signal input source may not be

connected properly.

B The input selection setting may not be correct.

(Refer to page 24.)

B The BRIGHT adjustment setting may be at the

minimum possible setting. (Refer to page 32.)

B The shutter function may be in use. (Refer to page

38.)

B The lens cover may still be attached to the lens.
B The lens focus may not have been set correctly.

(Refer to page 25.)

B The projector may not be at the correct distance

from the screen. (Refer to pages 22 and 23.)

B The lens may be dirty.
B The projector may be tilted too much. (Refer to

page 24.)

B COLOR or TINT adjustment may be incorrect.

(Refer to page 32.)

B The input source which is connected to the

projector may not be adjusted correctly.

B The audio signal source may not be connected

properly.

B The volume adjustment may be at the lowest

possible setting. (Refer to pages 15 and 26.)

B The battery may be weak.
B The battery may not be inserted correctly. (Refer to

page 18.)

B The remote control signal receptor on the projector

may be obstructed. (Refer to page 18.)

B The remote control unit may be out of the

operation range. (Refer to page 18.)

B The correct input signal may not be selected.

(Refer to page 24.)

B The signal format (TV system) may not be set

correctly. (Refer to page 33.)

B There may be a problem with the video tape or

other signal source.

B A signal which is not compatible with the projector

may be being input. (Refer to page 52.)

B The cable may be too long.
B The external video output for the laptop computer

may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)

B If an RGB input monitor (refer to pages 14 and 17)

is turned off, the video signals may not be output
from the computer.

B RGB2 SELECT in the OPTION2 menu is set to

OUTPUT when the signals are input to RGB2 IN /
RGB1 OUT connector. (Refer to page 36)