Panasonic PT-LB10SU User Manual

Be sure to attach the lens cover before moving the projector.
The projection lens is extremely susceptible to vibration and shocks. When
moving the projector, use the accessory carrying bag. When placing the
projector inside the carrying bag, position it so that the lens is facing upward.
Do not put anything else in the bag other than the projector and the cables.

Avoid setting up in places which are subject to vibration or shocks.
The internal parts can be damaged, which may cause malfunctions or
accidents.

Do not set up the projector near high-voltage power lines or near
motors.
The projector may be subject to electromagnetic interference.

If installing the projector to the ceiling, ask a qualified technician to
carry out all installation work.
You will need to purchase the separate installation kit (Model No.ET-PKC80).
Furthermore, all installation work should only be carried out by a qualified
technician.

If using this projector at high elevations (above 1 400 m), set the “FAN
CONTROL” to “HIGH”. (Refer to page 45.)
Failure to observe this may result in malfunctions.

Card remote control unit
(TNQE239 x1)

Power cord
(K2CG3DR00005 x 1)

Carrying bag
(TPEP009 x 1)

Lithium battery for
remote control unit
(CR2025 x1)

RGB signal cable 
[1.8 m (5´10˝),
K1HA15DA0002 x1]

Check that all of the accessories shown below have been included with your
projector.

ENTER

FREEZE

SHUTTER

INDEX

WINDOW

PROJECTOR

VOLUME

D.ZOOM

STD

AUTO

SETUP

VIDEO

INPUT

POWER

RGB

MENU