Panasonic PT-LB20SE User Manual

Red

Illuminated

The projector is in standby mode and image projection
is possible by pressing the POWER button.

A picture is being projected.

The lamp is cooling down after the power has been
turned off or while direct power off function is
operating.
The projector is preparing for projection after the
power has been turned on while the POWER button
on the projector is illuminated orange. (After a short
period, a picture will be projected.)

The projector is preparing for projection after the
power has been turned on while the POWER button
on the projector is illuminated red. (After a short
period, a picture will be projected.)

Flashing

Illuminated

Illuminated

Flashing

Green

Orange

You can disconnect the mains lead during projection or immediately after
use and move the projector. The cooling fan will operate by the internal
power supply to cool down the lamp.
B When this function is used, it may take more time for the lamp to turn back

on again compared to when the lamp cools down with the mains lead
connected.

B Do not put the projector in a bag while the POWER button on the

projector is illuminated.

If not using the projector for an extended period of time, disconnect the
mains plug from the mains socket.
B If dust builds up on the mains plug, the resulting humidity may damage the

insulation, which could result in fire.

B This projector continues to draw approximately 4 W of power even when

the power is turned off.