Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-EX800Z
  5. User Manual

Panasonic PT-EX800Z User Manual

Download
Page of 157
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 47
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
For details of power cord handling, refer to “Read this first!” (x page 2).
Attaching the power cord
1)  Check the shapes of the <AC IN> terminal on the rear of the projector body and the power cord 
connector, and insert the plug completely in the correct direction (until you hear the side tabs click in 
place).
Removing the power cord
1)  Confirm that the <MAIN POWER> switch on the rear of the projector body is on the <OFF> side, and 
remove the power plug from the outlet.
2)  Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the 
side tabs.
Power indicator
Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.
Power indicator <ON (G)/STANDBY (R)>
Indicator status
Projector status
Off
The main power is switched off.
Red
Lit
The power is switched off (in standby mode).
Projection will start when the power on <b> button is pressed.
 
f
The projector may not operate when the lamp indicator <LAMP> or temperature 
indicator <TEMP> is flashing. (x page 129)
Green
Lit
Projecting.
Orange
Lit
The projector is preparing to switch off the projector.
The power is switched off after a while. (Changes to the standby mode.)