Panasonic PT-EX800Z User Manual

Chapter 4 Settings — [ADVANCED MENU] menu

74 - ENGLISH

Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen.

 

f

After selecting the item, press asqw to adjust.

You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576i 

signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.

1)  Press as to select [DIGITAL CINEMA REALITY].
2)  Press qw to switch the item.

 

f

The items will switch each time you press the button.

Performs automatic detection and cinema processing. (Factory default)

Does not perform cinema processing.

Only during 480i or 1080/60i 

signal input

Performs forced cinema processing (2:2 pulldown).

Only during 576i or 1080/50i 

signal input

 

f

In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p 

FIXED]. (Vertical resolution will degrade.)

You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while an 

image from the VCR or other devices are projected.

1)  Press as to select [BLANKING].
2)  Press the <ENTER> button.

 

f

The 

[BLANKING] adjustment screen is displayed.

3)  Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].
4)  Press qw to adjust the blanking width.

Press the q 

button.

The blanking zone 

moves upward.

PT-EZ770Z: Top to bottom 

0 - 599

PT-EW730Z: Top to bottom 

0 - 399

PT-EX800Z: Top to bottom 

0 - 383

Press the w 

button.

The blanking zone 

moves downward.

Press the w 

button.

The blanking zone 

moves upward.

Press the q 

button.

The blanking zone 

moves downward.