Panasonic PT-EX800Z User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu

94 - ENGLISH

Set the <REMOTE 2 IN> terminal.

1)  Press as to select [REMOTE2 MODE].
2)  Press qw to switch the item.

 

f

The items will switch each time you press the button.

The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the 

projector.

Used to change the setting of the <REMOTE 2 IN> terminal.

The setting of the <REMOTE 2 IN> terminal is used for the F/W series compatibility.

 

f

When [USER] is selected, proceed to Step 

3).

3)  Press the <ENTER> button.
4)  Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

Set the functions of the <FUNCTION> button on the remote control.

1)  Press as to select [FUNCTION BUTTON].
2)  Press the <ENTER> button.

 

f

The 

[FUNCTION BUTTON] screen is displayed.

3)  Press as to select a function.

Disables the <FUNCTION> button.

Displays the sub memory list. (x page 105)

Switches the [SYSTEM SELECTOR] setting. (x page 68)

Switches the [DAYLIGHT VIEW] setting. (x page 68)

Displays the test pattern built-in to the projector. (x page 102)

Set audio functions in detail.

1)  Press as to select [AUDIO SETTING].
2)  Press the <ENTER> button.

 

f

The 

[AUDIO SETTING] screen is displayed.

3)  Press as to select [VOLUME].
4)  Press qw to adjust the level.

Press w.

Increases the volume.

0 - 63

Press q.

Decreases the volume.

1)  Press as to select [AUDIO SETTING].
2)  Press the <ENTER> button.

 

f

The 

[AUDIO SETTING] screen is displayed.

3)  Press as to select [BALANCE].