Panasonic PT-EZ570EL User Manual

ENGLISH -

Settings

Input menu

Select [Input] from the Main Menu (see

“Navigating through the menu” on page 46),

then select the item from the sub-menu.

Input 1

Press ▲▼ to select [Input 1].

1 )

Press ► to access the submenu.

2 )

Press ▲▼ to select [RGB(PC analog)],

3 )

[RGB(Scart)], [DVI-D], [DVI-D(HDCP)]

or [HDMI].
Press the <ENTER> button.

4 )

Computer System Selection

This projector automatically tunes to various types

of computers with its Multi-scan system and Auto

PC Adjustment. If a computer is selected as a signal

source, this projector automatically detects the signal

format and tunes to project a proper image without

any additional settings. (Signal formats provided in

this projector are shown on pages 109 -113.)

When the projector cannot recognize the

connected signal conforming to the

provided PC Systems,

Auto is displayed

on the System Menu box and the Auto PC

adjustment function works to display proper

images. If the image is not projected

properly, a manual adjustment is required.

There is no signal input from the computer.

Check the connection between your

computer and the projector.

The preset system is manually adjusted in

the PC adjust Menu. The adjusted data can

be stored in

Mode 1-10.

PC Systems provided in this projector

is chosen. The projector chooses a proper

system provided in the projector and

displays it.

* Mode 1 and SVGA 1 are examples.

Press ▲▼ to select [System].

1 )

Press ► or the <ENTER> button to

2 )

access the submenu.
Press ▲▼ to select the desired system.

3 )

Input 2

Press ▲▼ to select [Input 2].

1 )

Press ► to access the submenu.

2 )

Press ▲▼ to select [Video], [Y, Pb/

3 )

Cb,Pr/Cr], or [RGB].
Press the <ENTER> button.

4 )

Input 3

Press ▲▼ to select [Input 3].

1 )

Press ► to access the submenu.

2 )

Press ▲▼ to select [Video], [Y, Pb/

3 )

Cb,Pr/Cr], or [S-video].
Press the <ENTER> button.

4 )

Video System Selection

Video or S-video

Auto

The projector automatically detects an incoming video

system, and adjusts itself to optimize its performance.

When Video System is [PAL-M] or [PAL-N], select the

system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image,

select a specific broadcast signal format from among

[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and

[PAL-N].

Auto

- - - -

Mode 1

SVGA 1

Remote Control

Side Control