Panasonic PT-EX600UL User Manual
52
- ENGLISH
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see
“Navigating through the menu” on page 47),
then select the item from the sub-menu.
Remote Control
Side Control
Auto PC adj.
Auto PC adjustment function is provided to
automatically adjust [Fine sync], [Total dots], [Position
H] and [Position V] to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and
then press the <ENTER> button.
[Please wait...]
z
appears while the Auto PC
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode (1–10) in the PC System Menu (see page 50).
See also [Store] on page 54.
Attention
[Fine sync], [Total dots], [
z
Position H
] and [
Position
V
] of some computers cannot be fully adjusted with
the Auto PC adjustment function. When the image
is not provided properly with this operation, manual
adjustments are required (
Æ
pages 53-54).
The Auto PC adjustment cannot be operated when
z
[480i], [576i], [480p], [576p], [720p], [1 035i] or
[1 080i] is selected in the PC System Menu (
Æ
page
50), or when the signal is coming from the HDMI or
DVI-D terminal.