Panasonic PT-LB90U User Manual
About Your Projector
Preparation
14 -
E
NGLISH
Remote control
J
Top view
Remote control
signal emitters
Front view
J
POWER button
Switch between stand-by
mode and projection mode.
Switch the required input signal button to
select.
(The
NETWORK button is only for PT-LB90NTU)
(See CD-ROM contents.)
Display the main menu.
Navigate through the menus with the
▲▼◄►buttons, and activate the menu
item with
ENTER button.
Capture the projected image as a frozen
picture.
Reset some of the settings to the
factory default settings.
The
MULTI-LIVE button is only for
PT-LB90NTU.
(See CD-ROM contents.)
Control to change the scale by
means of digital zoom.
Detect the input signal and the
setting of
SHIFT, DOT CLOCK
and
CLOCK PHASE in POSITION
menu will be adjusted automati-
cally for
COMPUTER signals.
The
PAGE buttons are only for
PT-LB90NTU.
(See CD-ROM contents.)
Turn off the projection temporarily.
Display the frozen image while
the display of subsequent images
continues.
The
COMPUTER SEARCH button
is only for PT-LB90NTU.
(See CD-ROM contents.)
Assign a useful function for a
shortcut.
Control to adjust the volume of the
speaker.
Note
Do not drop the remote control.
z
Avoid contact with liquids or moisture.
z
Do not attempt to modify or disassemble the remote control.
z
Do not mix old and new batteries or batteries of different types.
z
Use only manganese batteries or alkaline batteries with the remote control.
Do not swing the strapped remote control.
z
Remarks
z
Do not let strong light shine onto the signal receptor.
The remote control may malfunction under strong light such as fluorescent.
z
You can operate the projector with the remote control within the remote range of 15 m (49'2"), approximately
±30 ° vertically and horizontally.
If there are any obstacles between the remote control emitter and the remote control signal receptor, the remote
z
control may not operate correctly.
The operating range may differ due to the screen material, and this function may not be effective with a translu-
cent screen.
Battery compartment
Press the tab and lift up the cover. Insert the batteries according to the
polarity diagram indicated inside.
Attaching a hand strap
You can attach a favourite
strap onto the remote control.