Panasonic PT-EZ770Z User Manual
Chapter 4 Settings — [DISPLAY OPTION] menu
78 - ENGLISH
[OFF]
Standard setting
[USER]
For each of the following four signal formats: VIDEO, Y/C, RGB, and YP
B
P
R
/YC
B
C
R
, six colors of red,
green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button
to set the details. Adjustment is possible within the range of -31 - +31.
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screen
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screen
in use.
1) Press as to select [SCREEN SETTING].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[SCREEN SETTING] screen is displayed.
3) Press qw to switch the [SCREEN FORMAT] item.
f
The items will switch each time you press the button.
Model No.
[SCREEN FORMAT]
Range when [SCREEN POSITION] is selected
PT-EZ770Z
[16:10]
Cannot be adjusted.
[4:3]
Adjusts the horizontal position between -160 and 160.
[16:9]
Adjusts the vertical position between -60 and 60.
PT-EW730Z
[16:10]
Cannot be adjusted.
[16:9]
Adjusts the vertical position between -40 and 40.
PT-EX800Z
[4:3]
Cannot be adjusted.
[16:9]
Adjusts the vertical position between -96 and 96.
4) Press as to select [SCREEN POSITION].
f
If [SCREEN FORMAT] is set to [16:10] on PT-EZ770Z, PT-EW730Z, or [SCREEN FORMAT] is set to [4:3] on PT-EX800Z, then
selection and adjustment of [SCREEN POSITION] are not available.
5) Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control
on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SIGNAL].
2) Press qw to switch the item.
2) Press qw to switch the item.
f
The items will switch each time you press the button.
[OFF]
Sets the auto signal function to off.
[ON]
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press as to select [AUTO SETUP].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[AUTO SETUP] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[DEFAULT]
Standard setting.