Panasonic PT-F300NTEA Leaflet
(PT-F300NTU/PT-F300NTE/PT-F300NTEA)
(PT-FW300NTU/PT-FW300NTE/PT-FW300NTEA)
Network Function Quick Guide
Installing the software
Wireless Manager mobile edition (henceforth abbreviated to “ME”) 5.5 is used to send screen
•
images from a computer to the projector via a wireless or wired LAN.
Before installation, see “System requirements” at the upper right of this guide.
•
Shut down all software currently active on your computer. Otherwise, installation may not
•
be possible.
Administrator authority is required for installation.
•
Set the supplied CD-ROM in the CD or DVD drive.
1
Double-click [WMmac5.5.dmg] in the CD or DVD drive.
2
[WMmac] appears on the desktop.
※ In the case of MacBook Air
Set the CD-ROM in the CD or DVD drive shared via the network.
※ In the case of MacBook Air
Set the CD-ROM in the CD or DVD drive shared via the network.
Double-click [Wireless Manager.pkg].
3
The installer starts up.
•
Follow the instructions on the screen to install this software.
•
If the name and password setting window appears, enter those of the administrator.
•
Install Wireless Manager ME 5.5 in the [Applications] folder (./Applications).
•
Viewing the operating instructions
The “Network Function Edition for Macintosh” document is stored in the supplied CD-ROM in
PDF file form.
PDF file form.
Set the supplied CD-ROM in the CD or DVD drive.
1
Double-click [Index.pdf] in the CD or DVD drive.
2
Click on a desired document name on the displayed list.
※ In the case of MacBook Air
Set the CD-ROM in the CD or DVD drive shared via the network.
※ In the case of MacBook Air
Set the CD-ROM in the CD or DVD drive shared via the network.
System requirements
●
OS
Mac OS X v10.4
Mac OS X v10.5
Mac OS X v10.5
CPU
1 GHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster
RAM
256 MB or more (512 MB or more is recommended)
Empty hard
disk capacity
60 MB
Web browser
Safari 2.0 or newer
Hardware
conditions
CD or DVD drive
Connection to the local area network (when installing via the network)
Wireless or wired LAN function
Connection to the local area network (when installing via the network)
Wireless or wired LAN function
Wireless
LAN
An IEEE802.11 b/g built-in wireless LAN adaptor must be running properly.
However, some
IEEE802.11 b/g wireless LAN may not allow connection to IEEE802.11 g projector.
Wired LAN
A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) must be running
properly.
A LAN cable to connect must be compatible with category 5 or above (category 5e or
above when using 1000BASE-T). Consult your system administrator when selecting a
straight or crossover type.
properly.
A LAN cable to connect must be compatible with category 5 or above (category 5e or
above when using 1000BASE-T). Consult your system administrator when selecting a
straight or crossover type.
Operation is not guaranteed for all computers that meet the above conditions.
•
Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.
•
It is forbidden to take the projector outside the country or region where you purchased it, so use it only in
•
the said country or region. Also, note that depending on countries or regions there are restrictions on the
channels and frequencies at which you can use the wireless LAN.
channels and frequencies at which you can use the wireless LAN.
You must agree to the “Software Licensing Agreement” to use the supplied software. Please read it
•
carefully when it is displayed during installation.
URL
:
http
:
//panasonic.net/pavc/projector/
Macintosh is a registered trademark of Apple Inc. in the USA and other countries.
•
Mac OS is a registered trademark of Apple Inc. in the USA and other countries.
•
PowerPC is a registered trademark of IBM Corporation.
•
Intel Core is a registered trademark of Intel Corporation in the USA and other countries.
•
Using network functions
※The projectors illustrated as examples are PT-F300NTU.
For details of usage, see “Network Function Edition for Macintosh” in the supplied CD-ROM.
Easy wireless set up
●
Launch Wireless Manager ME 5.5.
1
When the user name setting window appears
Set the icon and user name, and click [OK].
If the icon and user name have already been set, the setting window does not appear. Go to
•
step 2.
Select the projector that you want to connect to, and click
2
[Connect].
When the confirmation
dialog window appears
dialog window appears
When the network adaptor
selection window appears
selection window appears
<Live mode>
Click [YES].
(1)
Select the adaptor from the
(1)
list and click [OK].
If the confirmation dialog
If the confirmation dialog
(2)
window appears, click
[YES].
[YES].
Used for normal presentations
Click [
3
] on the launcher.
Other examples of usage
●
<Multi live mode>
<4-screen multi style>
<4-screen index style>
<16-screen index style>
<Multiple source live mode>
<Multiple source multi live mode>
<Selective area transmission>
<Infrastructure mode (Connecting through the access point)>
<Using WebBrowser> <Using PJLink™ protocol>
See “Network Function Edition for Macintosh” in the supplied CD-ROM.
The small-screen
layout is the example of
PT-F300NTU.
layout is the example of
PT-F300NTU.
Access point (AP)
LAN
TQDJ19125(En) S1008-0A
Macintosh
ENGLISH
한국어