Panasonic PT-EX600EL User Manual

Complete peripheral connections (with a 

1 ) 

computer, VCR, etc.) before turning on the 

projector.
Connect the projector’s AC power cord into an 

2 ) 

AC outlet. The <ON(G)/STANDBY(R)> indicator 

lights red.
Press the <

3 ) 

> button on the side control or 

the <POWER ON> button on the remote control. 

The <ON(G)/STANDBY(R)> indicator lights 

green and the cooling fans start to operate. The 

preparation display appears on the screen and 

the count down starts.
After the countdown, the input source that was 

4 ) 

selected the last time and the lamp power status 

icon appear on the screen.

         If the projector is locked with a PIN code, PIN  

code input dialog box will appear. Enter the PIN 

code as instructed on the next page.

When the [Logo select] function is set to [Off], the logo 

 

z

will not be shown on the screen (

Æ

page 63).

When [Countdown off] or [Off] is selected in the [Display] 

 

z

function, the preparation display will not be shown on the 

screen (

Æ

page 63).

When the [Direct on] function is set to [On], the projector 

 

z

will be turned on automatically by connecting the AC 

power cord to an AC outlet.

The Lamp replacement icon and the Filter replacement  

 

z

icon may appear on the screen depending on the usage 

state of the projector.

When the [Picture in Picture] function is set to User 

 

z

1-5, User 1-5, Input source, Lamp power status, Lamp 

replacement icon and Filter warning icon will appear on 

the screen for 10 seconds.

(2)

(3)

(3)

06

The preparation display will disappear 

after 30 seconds

.

Lamp power status

Input source