Panasonic PT-EX600EL User Manual

Be sure to note the new Logo PIN code and keep it on 

 

z

hand. If you lost the number, you could no longer change 

the Logo PIN code setting.

This function is used to project two images 

simultaneously by placing a separate small sub 

screen within or next to the main screen.

*

You can also press the <P IN P>button on 

 

z

the remote control for more than 3 seconds to 

display [Picture in Picture] menu.

Only the sound from the source of Main picture 

 

z

is valid, while the source of Sub picture cannot 

output the sound.

* (Only for EZ570 series, EW630 series and EW530 

series.)

J

Show the selected mode ([Off/User 1-5]) and its status 

([Stored /Free/ Adj.]). [User 1] and [User 2] have 

stored default values.

J

Provide the images of Main picture 

and Sub picture at the ratio of 

Screen aspect in the Screen Menu.

P by P Provide the images of Main picture 

and Sub picture at the ratio of 4:3.

In [P in P] the larger picture is main picture, and the 

 

z

smaller one is sub picture; in [P by P], the left picture is 

main picture, and the right one is sub picture.

J

The frame will disappear after 10 seconds or 

 

z

when the <ENTER> button is pressed.

Select an input from Input 1-3.

Source Select an input source.

Select the display size.

Position Press the <ENTER> button at 

Position and the display position 

setting screen appears.

z

     During Picture in Picture mode, and being 

undisplayed On Screen Menu, press the <ENTER> 

button to select Main or Sub picture. (A red frame 

will be displayed on the selected picture.)

z

     When selecting Main picture or Sub picture, input 

and source can be set by pressing the <INPUT> 

button on the side control or INPUT 1/2/3 button 

on the remote control. Operation on the On Screen 

Menu is not necessary.

J

Set the Frame Lock to Main picture or Sub picture.

J

Press the <ENTER> button at [Reset] to display a 

confirmation box. To reset, press the <ENTER> button 

at [Yes].

J

Delete the data stored in the Mode and return to [Free]. 

Use the ▲▼ buttons to select [Mode free] and press 

the <ENTER> button to show the [Where to free?] 

dialog box. Move the highlight to one of the mode 

([User 1 - 5]) which you want to delete and press the 

<ENTER> button. Then the confirmation box appears. 

To delete, select [Yes].

J

Store the adjusted data in the [User 1-5]. Use the 

▲▼ buttons to select [Store] and press the <ENTER> 

button to show the [Where to store?] dialog box. Move 

the highlight to one of the mode (User 1 - 5) which 

you want to store and press the <ENTER> button. 

Then the confirmation box appears. To store adjusted 

data, select [Yes].

The [Picture in Picture] function is not available 

 

z

depending on the input signals and the selected input 

terminals.

When the input signal(s) is/are incompatible, 

 

z

X

 mark will 

be displayed on the Main/Sub picture.