Panasonic PT-EX500U User Manual

This function is only used for HDMI input source.

The names for the output setting of Digital R/G/

 

z

B vary from equipment to equipment.

J

When the output of Digital R/G/B 

equipment is set to Standard.

When the output of Digital R/G/B 

equipment is set to Enhanced.

J

When Digital input source is input,

Sound is set to HDMI.

AUDIO 1 When DVI input source is changed 

to HDMI input source, Sound is set 

to 

AUDIO 1.

For details, refer to the operating instructions of your 

 

z

Digital R/G/B equipment.

This function is only used for DVI-D input source.

When you want to enhance 

the weaken signal.

When in normal condition.

This function allows you to change brightness of the 

screen.

Brightness according to the input 

signal. 

The lamp power output is 

maximum.

The lamp power output is 80% 

of the Normal mode.

The lamp power output is 30% - 

80% of the Normal mode.

Choose the running speed of cooling fans from 

 

z

the following options according to the ground 

elevation under which you use the projector.

Normal speed.*

1

Faster than [Off] mode.*

2

Faster than [On 1] mode.*

3

Set this function to [Off] when using the projector 

*1 : 

in non-high altitude environment.

Select [On 1] when using the projector in high 

*2 : 

altitudes (about 1 000 ~ 2 000 meters or more 

above the sea level) where the fans have less 

cooling effect.

Select [On 2] when using the projector in higher 

*3 : 

altitudes (about 2 000 ~ 2 800 meters or more 

above the sea level) where the fans have lesser 

cooling effect.

Failure to set the running speed of cooling fans 

 

z

properly may affect the projector life.

The fan noise becomes louder in [On 1] and [On 2].

 

z