Panasonic PT-EX600E User Manual
ENGLISH -
51
Settings
AUTO PC adjust
Select [PC adjust] from the Main Menu (see
“Navigating through the menu” on page 46),
then select the item from the sub-menu.
Remote Control
Side Control
Auto PC adj.
Auto PC adjustment function is provided to
automatically adjust [Fine sync], [Total dots], [Position
H] and [Position V] to conform to your computer.
Press ▲▼ to select [Auto PC adj.] and
then press the <ENTER> button.
[Please wait...]
z
appears while the Auto PC
adjustment is in process.
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment
can be stored in the projector. Once the parameters
are stored, the setting can be done just by selecting a
Mode (1–10) in the PC System Menu (see page 49).
See also [Store] on page 53.
Attention
[Fine sync], [Total dots], [Position H] and [Position V] of
z
some computers cannot be fully adjusted with the Auto
PC adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (
Æ
pages 52-53).
The Auto PC adjustment cannot be operated when
z
[480i], [576i], [480p], [576p], [720p], [1 035i] or [1 080i] is
selected in the PC System Menu (
Æ
page 50), or when
the signal is coming from the HDMI or DVI-D terminal.