Panasonic PT-EX600E User Manual
Maintenance/replacement
ENGLISH -
95
Maintenance
Replacing the unit
Replacement of the air filter unit
J
Turn off the projector, and unplug the
1 )
AC power cord from the AC outlet.
Clean up the dust on the projector and
Clean up the dust on the projector and
2 )
around the air vents.
Press ▼ downwards on the filter cover
Press ▼ downwards on the filter cover
3 )
to release the latch and open the filter
cover.
Pull out the air filter unit.
Pull out the air filter unit.
4 )
Pick the tab and frame of the air filter unit,
z
release the lock with pressing the tab rightwards
in the figure, and then pull.
Attach the air filter unit.
5 )
Hold the air filter unit that the tab is in left side in
z
the figure, put the right side in the figure first, and
press the tab side until make a click sound.
Close and press up to lock the filter cover.
6 )
Make sure that the air filter cover is closed tightly.
z
Reset the filter counter.
7 )
Turn on the power and perform [Filter counter reset]
z
in the [Setting] menu.
Attention
Turn off the power before you replace the air filter unit.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the air filter unit removed. Dust may accumulate on the optical elements
z
degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
The air filter unit to be replaced should be an unused product.
z
Filter cover
Air filter unit
Tab
[OPEN
▲▼ LOCK]