Panasonic PT-F200NTE/PT-FW100NTE User Manual

30

Select [NEXT] on the IP address setting window to switch to the wireless setting window. 
Make the settings related to the wireless connection between the projector and the network.

 SSID

※

 : 

 

If the mode is [INFRASTRUCTURE

※

], enter the SSID registered at the access point. If the mode is 

[AD HOC], enter the same character string as that of SSID set on the computer to be connected.

 MODE 

: Select [AD HOC] or [INFRASTRUCTURE].

 AD 

HOC

※

 : 

 

Connect projector and computer directly without access point.

 INFRASTRUCTURE

※

  : Connect through access point.

 AUTHENTICATION  :  Set the user authentication method used by the network to be connected.

 OPEN 

: 

 

Select when making a connection using [AD HOC], or when the access point authentication method is 
OpenSystem

※

.

 SHARED 

: 

 

Select when making a connection using [AD HOC], or when the access point authentication method is 
Shared Key

※

.

 WPA-PSK

※

 : 

 

Select when the access point authentication method is WPA-PSK.

 ENCRYPTION :  Select the encryption method to be used for communication between the projector and the network.

 NONE 

 

: 

 

Select when transmit without encryption. It is selectable only when [AUTHENTICATION] is [OPEN] or 
[SHARED].

 WEP

※

   

: Select when ENCRYPTION is WEP.

 TKIP

※

   

: Select when ENCRYPTION is TKIP. 

 

 

 

  Selectable when [AUTHENTICATION] is [WPA-PSK].

 AES

※

   

: Select when ENCRYPTION is AES. 

 

 

 

  Selectable when [AUTHENTICATION] is [WPA-PSK].

※ “Glossary” (See page 45)

• If you are unable to connect to the wireless LAN through the access point even after performing the steps in “

ヂ Projector 

• This projector does not conform to WPA2, IEEE 802.1x.