Panasonic PT-F200U User Manual

When projecting an image, press FREEZE to 
capture the projected image and display it on 
the screen as a still picture. While the image is 
frozen, the sound will be stopped.

Press the FREEZE button to return to the projection.

You can turn off the lamp and stop the 
projection temporary for electrical power save. 

Press the SHUTTER button to return to the projection.

You can reset most of the customized settings 
to the factory defaults by pressing the 
DEFAULT button of the Remote control. 
Display the required sub menu or the menu 
items and press the DEFAULT button again.

You can project an image in split 2 windows 
as an INDEX-WINDOW, one is frozen, stored 
in memory and displayed on the screen’s left 
side, while the display of subsequent images 
continues on the right.
To escape from the INDEX-WINDOW, press 
the MENU or RETURN button.

Q

In default, the frozen image is displayed on the left 
and the subsequent image is displayed on the 
right. Press I H to switch the position.

Q

Press F G to capture a new image and change 
the size in 3ways.

Q

While in INDEX-WINDOW mode, press ENTER to 
capture a new image and the frozen image window 
will be updated in a while.

• Not available with NETWORK signals.

• Some menu items are not available to reset by pressing 

the DEFAULT button. Adjust each menu items 
manually.

• To reset all the settings to the factory defaults, see 

• If you change the window size, the aspect ratio of the 

image is changed and becomes vertically elongated.