Panasonic PT-F200U User Manual

Depending on the projection environment, you can use 
these preset parameter settings to optimize image 
projection. Press I H to cycle through the options.

You can adjust the contrast of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.

You can adjust the brightness of the projected image.

You can adjust the color saturation of the projected 
image. (Available with signals from VIDEO/S-VIDEO/
COMPONENT only)

You can adjust the skin tone in the projected image. 
(Available with signals from VIDEO/S-VIDEO/
COMPONENT only)

You can adjust the sharpness of the projected image.

You can adjust the white balance of the projected image.

 

More bluish

 

Balanced white

 

More reddish

You can keep the projected image bright and vivid even 
in well-lit rooms where the ambient light sources cannot 
be controlled, such as when a door opens or when 
window coverings fail to block out sunlight.

 

AUTO:

Automatic adjustment

 

ON:

Active

 

OFF:

Deactive

Reproduces the original color 
of the image

Setting for a general image

Bright and sharp setting

Setting for when projecting on 
a blackboard
See “BLACKBOARD” on 
page 36.

• It may take for a while until the selected mode is 

stabilized.

 

 

• Do not cover the ALS (Ambient Luminance Sensor) of 

the projector. See “ALS (Ambient Luminance Sensor)” 
on page 12.

• AUTO is not available when INSTALLATION setting in 

OPTION menu is set to REAR/DESK or 
REAR/CEILING.