Panasonic PT-LB80NTU User Manual

J

 

Switch off the projector and disconnect the power plug from the wall outlet.

 

Unplug all the cables from the projector.

J

Wipe off dirt and dust gently with a soft cloth.
 

If it is difficult to remove the dirt, soak a cloth with water, wring the cloth well and then wipe the projector. 
Dry off the projector with dry cloth.

 

Do not use petroleum benzine, thinner, any alcoholic solvent, kitchen detergents or chemical clothes. 
Failure to observe these may result in altered or damaged surface of the projector.

J

Wipe off dirt and dust gently with a lint-free cloth.
 

Make sure no dirt or dust remains on the surface of the lens cover glass. It will be enlarged and projected 
onto a screen.

J

If the air filter is excessively dirty, the internal temperature of the projector increases and may cause malfunction. 
Clean the air filter regularly every 100 hours of usage.

1. Turn the projector upside down and place it gently 

on a soft cloth.

2. press the tab and slightly slide up the air filter to 

remove.

3. Vacuum dirt and dust from the air filter.

 

Do not wash the air filter.

4. Place and slightly slide in the air filter in the air 

intake port to attach.

 

Make sure the air filter clicks into the place.

J

The air filter should be replaced when cleaning is ineffective and when replacing lamp unit. A replacement air 
filter is provided with a replacement lamp unit (ET-LAB80). Contact an Authorized Service Center for the 
optional air filter (TXFMZ01VKG7).

• Clean the front glass with special care. Giving a shock may cause serious damage.

Tab

Air filter

• Do not use the projector without attaching the air filter.