Panasonic PT-FW100NTU User Manual

You can operate the projector with the Remote control 
within the remote range 15 m (49'2").

Q

Ensure the Remote control emitter is facing to 
the Remote control signal receptor on front/back 
of the projector and press the required buttons to 
operate.

Q

Ensure the Remote control emitter is facing to 
the screen and press the required buttons to 
operate the projector. The signal will be reflected 
off the screen. The operating range may differ due 
to the screen material. This function may not be 
effective with a translucent screen.

You can adjust the setting of POSITION, DOT 
CLOCK and CLOCK PHASE in the POSITION 
menu automatically for the projected 
COMPUTER signal image.

• Do not let strong light shine onto the signal receptor. 

The Remote control may malfunction under strong 
light such as fluorescent.

• If there are any obstacles between the Remote control 

and the Remote control signal receptor, the Remote 
control may not operate correctly.

• If the dot clock frequency is 108 MHz or higher, AUTO 

SETUP is not effective.

• If the projected image is dark or blurred around the 

edge, AUTO SETUP may stop the processing before 
complete. Project a much clearer or lighter image and 
press the AUTO SETUP button again.

Screen

Projected image