Panasonic PT-EZ770ZU User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
6) Press qw to switch the item.
f
The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item.
8) Press qw to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the control commands of an existing projector
When controlling the projector on a computer, set use of control commands on a previously purchased Panasonic projector. This allows the
control software for an existing Panasonic projector to be inherited and used.
1) Press as to select [RS-232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS-232C] screen is displayed.
3) Press as to select [EMULATE].
4) Press the <ENTER> button.
5) Press as to select an item.
4) Press the <ENTER> button.
5) Press as to select an item.
[DEFAULT]
EZ770 series, EW730 series, EX800 series, RZ475 series, RZ470 series, RW430 series, RZ370
series, RW330 series
[D3500]
D3500 series
[D4000]
D4000 series
[D/W5k SERIES]
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
[D/W/Z6k SERIES]
DZ770 series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730
series, DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series,
DZ570 series, DW530 series, DX500 series
[L730 SERIES]
L730 series, L720 series, L520 series
[L780 SERIES]
L780 series, L750 series
[L735 SERIES]
L735 series
[L785 SERIES]
L785 series
[F/W SERIES]
FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370]
LZ370 series
[LB/W SERIES]
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series, LB78
series, LB75 series
[VX500 SERIES]
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX501U, VX405KEA,
VX45KEA, VX500 series, VW330 series, VX400NT series, VX400 series, VX41 series
[EZ570 SERIES]
EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D]
VW431D series
6) Press the <ENTER> button.
7) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
7) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f
When [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication using that serial terminal is available only when the
corresponding device (such as the optional Digital Interface Box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN>
terminal.
f
When transferring logos via the optional Digital Interface Box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set
to “OFF” to avoid cutting off communication.
f
When [INPUT SELECT] is set to [DIGITAL INTERFACE BOX], communication speed is fixed to 9 600 bps.