Panasonic PT-DS12KU User Manual

Chapter 6 Appendix — Specifications

180 - ENGLISH

The specifications of the projector are as follows.

AC 120 V, 50 Hz/60 Hz

1 000 W (9.3 A)

980 W (9.1 A)

925 W (9 A)

0.2 W when [STANDBY MODE] is set to [ECO]
6 W when [STANDBY MODE] is set to [NORMAL]

24.4 mm (0.96") (aspect ratio 16:10)

24.1 mm (0.95") (aspect ratio 4:3)

21.6 mm (0.85") (aspect ratio 16:9)

3-unit DLP chips, DLP type

2 304 000 pixels (1 920 x 1 200 dots)

1 470 000 pixels (1 400 x 1 050 dots)

1 049 088 pixels (1 366 x 768 dots)

Optional

380 W UHM lamp x 2

355 W UHM lamp x 2

12 000 lm (ANSI)

11 000 lm (ANSI)

10 600 lm (ANSI)

10 000:1 (when [DYNAMIC IRIS] is set to [3])

7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)

1.78 m (70") to 25.40 m (1 000")

16:10

4:3

16:9

[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]

3.0 m (118-1/8")

Molded plastic

530 mm (20-7/8")

200 mm (7-7/8") (with legs at shortest position)

548.5 mm (21-19/32") (excluding the lens)

Approx. 24.0 k] (52.9 lbs.)

*2

45 dB

43 dB

0 °C (32 °F) to 45 °C (113 °F)

10 % to 80 % (no condensation)

DC 3 V (AA/R6 battery x 2)

Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight

134 ] (4.7 ozs.) (including batteries)

Width: 51 mm (2"), Height: 176 mm (6-15/16"), Depth: 28 mm (1-3/32")

*1  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.

*2  Average value. Weight varies for each product.

*3  When using the projector at high altitudes (1 400 m (4 593') or higher – lower than 2 700 m (8 858') above sea level), the operating environment 

temperature should be between 0 °C (32 °F) and 40 °C (104 °F).

If you use the Smoke cut filter, the operating environment temperature should be between 0 °C (32 °F) and 35 °C (95 °F). However, it cannot be 

used at high altitudes.

If you use the Replacement lamp unit (for portrait mode), the operating environment temperature should be between 0 °C (32 °F) and 40 °C 

(104 °F) when using the projector at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 35 °C (95 °F) when 

using the projector at high altitudes. If you use the Smoke cut filter together, the operating environment temperature should be between 0 °C (32 °F) 

and 30 °C (86 °F).

If the [LAMP SELECT] menu is set to [DUAL], and [LAMP POWER] is set to [HIGH], [MIDDLE], or [NORMAL], and an ambient temperature reaches 

40 °C (104 °F) or higher (35 °C (95 °F) or higher when [HIGH ALTITUDE MODE] is set to [ON] or the Smoke cut filter is used), the light output may 

decrease by approx. 20 % to protect the projector.