Panasonic PT-F300E User Manual

When you start the projection for the first time, the minimum required setting screen for projection will be displayed.

J

1. Select the required language setting by pressing 

I H, then press the ENTER button.

2. Select the minimum required settings to start the 

projection.

 

Press the RETURN button to return to the language 
setting menu.

 

Press F G to move through the menu items.

 

Press I H to select the required setting.

 

Press the ENTER button to complete the setting and 
start the projection.

Select the required installation method.

If you use the projector at high elevation, the HIGH 
ALTITUDE MODE setting need to be ON to set the fan 
speed high.

 

The fan speed is low.

 

The fan speed is high.

INITIAL SETTING

ENGLISH

SELECT

ENTER

PLEASE SELECT LANGUAGE

INSTALLATION

INITIAL SETTING

FRONT/DESK

HIGH ALTITUDE MODE

OFF

SELECT

ENTER

RETURN

SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft).

Setting on a desk/floor and 
projecting from front

Mounting on the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting on the ceiling and 
projecting from rear

• At 1 400 - 2700 m (4 593 - 8 858 ft) above sea level, 

the setting must be ON.

• The loudness of fan noise depends on the HIGH 

ALTITUDE MODE setting.

 

Once you finish the minimum requirement setting, it will not be displayed again unless the projector is 
initialised. See “INITIALIZE ALL” on page 45.

 

You can change the each setting from the main menu. See “Menu Navigation” on page 32.