Panasonic PT-EZ580 PT-EW640 PT-EX610 PT-EW540 PT-EX510 User Manual

Page of 155
Chapter 3Basic Operations — Operating with the remote control
52 - ENGLISH
2)  Press the <SHUTTER> button again.
 
f
The image and audio reappear.
*<AV MUTE> button
(Only for PT-EW540 and PT-EX510)
 button
1)  Press the <AV MUTE> button.
 
f
The image and audio disappear.
 
f
This operation can be also performed using the <AV MUTE> button on the control panel.
2)  Press the <AV MUTE> button again.
 
f
The image and audio reappear.
Attention
 
f
When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] or [AV MUTE DETECTION] is set to [ON], 
do not switch on /off in a short time.
Note
 
f
The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter function or AV mute function is in use.
Using the mute function
Audio can be temporarily turned off.
 button
1)  Press the <MUTE> button.
 
f
The audio disappears.
2)  Press the <MUTE> button again.
 
f
The audio reappears.
Adjusting the volume
The volume of the built-in speaker or audio output can be adjusted.
 button
1)  Press the <VOL-> button/<VOL+> button on the remote control.
 
f
This operation can be also performed using the <VOL-> button/<VOL+> button on the control panel.
<VOL+>
Increases the volume.
<VOL->
Decreases the volume.
Using the freeze function
The projected image can be paused and audio turned off regardless of the playback of the external device.
 button
1)  Press the <FREEZE> button.
 
f
The image freezes and audio disappears.
2)  Press the <FREEZE> button again.
 
f
Freezing of the image is canceled and audio reappears.