Panasonic PT-F200NTU User Manual

When you start the projection for the first time, the minimum required setting screen for projection will be displayed.

J

Select the required language setting.

Press F G I H buttons of the Remote control or 
Control panel on the projector to highlight the 
required language, and press ENTER to proceed to 
the next setting.

J

Select the current projection method and fan speed 
setting. If you need return to the previous setting, 
press the RETURTN button.

Press I H buttons of the Remote control or 
Control panel on the projector to select the 
required installation method. Press G to proceed to 
the ALTITUDE setting.

If you use the projector at high elevation, the 
ALTITUDE setting need to be HIGH to set the fan 
speed high. Press I H to select the required 
option. If you need to return to the INSTALLATION, 
press F.

 

The fan speed is low.

 

The fan speed is high.

 

Once you finish the minimum requirement setting, it will not be displayed again unless the projector is 
initialized. See “INITIALIZE ALL” on page 36.

 

You can change the settings from the MAIN MENU. See “Menu Navigation” on page 27.

LANGUAGE

SELECT

ENTER

PLEASE SELECT LANGUAGE

INSTALLATION

OPTION

FRONT/DESK

ALTITUDE

LOW

SELECT

ENTER

RETURN

Setting on a desk/floor and 
projecting from front

Mounting in the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting in the ceiling and 
projecting from rear

• At 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, the 

setting must be HIGH.

• The loudness of fan noise depends on the ALTITUDE 

setting.