Panasonic TQBH9003-6 User Manual

103

To directly connect a personal computer to the
projector

Mount an optional projector LAN card
(ET-CDLAN1) on the projector, connect
the PC to this card with a cross cable, and
then make setting for communication.
For details of setting the projector, refer
to "Setting the projector" on page

104

For details of setting the PC, refer to
"Settings of personal computer" on page

112

Setting of the projector

Setting of the PC

Example of setting for use of the
projector LAN card

Usage of projector LAN card is classified into the following two types.

Note:

• The optional projector LAN card (ET-CDLAN1) cannot be used in a personal

computer.

Setting of the projector

Setting of the PC

Typical setting

Parameters

IP address

Subnet mask

LAN 1 - 5:
192.168.10.10-14
(factory default)

255.255.255.0
(factory default)

Assign an address such as
192.168.10.15 or 192.168.10.20.
The same IP address as the
projector cannot be used.

255.255.255.0

When connecting via a relaying device

When a hub or other relaying device is
placed between the projector and PC,
make setting for communication.
For details of setting the projector, refer
to "Setting the projector" on page

104

For details of setting the PC, refer to
"Settings of personal computer" on page

112

Typical setting

Parameters

IP address

Subnet mask

Please consult your network administrator.

Note:

• Read and follow the instruction manual for that relaying device.

Straight cable