Panasonic TQBH9003-6 User Manual

If the air filter becomes clogged with dust, the internal temperature of the
projector will rise, the TEMP indicator will flash and the projector power will
turn off. The air filter should be cleaned every 100 hours of use,
depending on the location where the projector is being used.

# Turn off the MAIN POWER

switch and disconnect the
power cord plug from the
mains socket.
Turn off the MAIN POWER switch
according to the procedure given
in “Turning off the power” on
page 

 before disconnecting the

plug from the mains socket.

$ Gently turn the projector

NOTE:
B Place the projector on top of a

soft cloth so that it will not
become scratched.

% Remove the air filter.

Put your fingernails under the air
filter and pull the air filter out of
the projector.

& Clean the air filter.

Use a vacuum cleaner to clean
off any accumulated dust.

NOTE:
B Be careful not to let the air filter

get sucked into the vacuum
cleaner.

' Install the air filter.

NOTE:
B Be sure to install the air filter

cover before using the projector.
If the projector is used without the
air filter cover installed, dust and
other foreign particles will be
drawn into the projector, and
malfunctions will result.

B If the dust cannot be removed by

cleaning, it is time to replace the
air filter. Please consult your
dealer. Furthermore, if the lamp
unit is being replaced, replace the
air filter at this time also.