Panasonic TQBH9003-6 User Manual
99
Network setting
Example of setting for use of the
wireless card
wireless card
Image transfer methods that use wireless card are broadly classified into four types
depending on the current working environment.
depending on the current working environment.
To use wireless communication for the first time
Insert the optional wireless card (ET-CDWL1) into your PC and make setting for the
direct wireless communication with the projector.
For details of setting the projector, refer to "Setting the projector" on page
direct wireless communication with the projector.
For details of setting the projector, refer to "Setting the projector" on page
.
For details of setting the PC, refer to "Settings of personal computer" on page
R
Personal computer
Projector
Setting of the projector
Setting of the PC
Typical setting
Parameters
IP address
Subnet mask
Mode
Channel
LAN 1 - 5:
192.168.10.10-14
(factory default)
If you use more than one
projector, assign a different
address to each of them.
192.168.10.10-14
(factory default)
If you use more than one
projector, assign a different
address to each of them.
255.255.255.0
(factory default)
(factory default)
AD HOC
11 (factory default)
Use the same setting as the
PC.
Use the same setting as the
PC.
Assign an address such as
192.168.10.15 or 192.168.10.20.
The same IP address as the
projector cannot be used.
192.168.10.15 or 192.168.10.20.
The same IP address as the
projector cannot be used.
255.255.255.0
Ad Hoc
11
Use the same setting as the
projector.
Use the same setting as the
projector.
Note:
• It is also necessary to install the wireless card driver and to make settings for the
wireless card.
For details of installing the wireless card driver, refer to "Installing wireless card
driver" on page
For details of installing the wireless card driver, refer to "Installing wireless card
driver" on page
For details of setting the wireless card, refer to "Settings of wireless card" on page