Panasonic PT-DW6300 User Manual

J

You can restore the sub memory data when using 
signals from the same input source. Sub memory data 
contains the setting information of screen and image 
adjustments, such as BRIGHTNESS, CONTRAST or 
ASPECT.

Q

1. Press I or H while the menu is cleared from the screen 

after adjustment.

 

The signal must be registered before creating a sub 
memory data of the signal.

 

Displays the list of corresponding sub memory data to the 
signal.

 

If the creating data is the first sub memory data of the 
signal, the status of the signal will be displayed to confirm. 

2. Select an empty data slot to register and press the 

ENTER button.

 

Displays the REGISTERED SIGNAL STATUS and change 
the name if necessary.

 

You can return to the previous step by pressing the MENU 
button.

3. Select OK and press the ENTER button.

 

Displays sub memory status and return to the projection.

 

MEMORY NO. indicates as follows.

Q

1. Press I or H while the menu is cleared from the screen 

after adjustment.

 

Displays the SUB MEMORY LIST.

2. Select the required sub memory data and press the 

ENTER button.

 

Displays the REGISTERED SIGNAL STATUS.

3. Press the ENTER button.

 

Restores the settings in the data.

Q

1. Press I or H while the menu is cleared from the screen 

after adjustment.

 

Displays the SUB MEMORY LIST.

2. Select the required sub memory data and press the 

ENTER button.

 

Displays the REGISTERED SIGNAL STATUS.

3. Press the DEFAULT button.

 

Displays the SUB MEMORY LIST with change.

 

You can return to the previous step by pressing the MENU 
button.

• The memories are numbered over 12 pages (A to L: 8 data 

items can be registered on each page), and the data is 
registered in the unused memory with the lowest number. If all 
the memories are used, the data of the old signals is 
overwritten in sequence.

Sub memory number:

Location address