Panasonic PT-DS100XE User Manual
Removing/attaching the projection lens (optional)
38
- ENGLISH
Getting Started
Removing/attaching the projection lens (optional)
How to install the projection
lens
Align the mark (orange) on the
1 )
projection lens with the mark on
the projector ( on the left side of
LOCK), then insert the lens and turn it
clockwise until there is a click.
Fix the projection lens with the
2 )
attached “Lens fixing screw”.
Û
Tighten the screw into the first screw hole
z
on the right side of the mark (orange) of the
projection lens with a Phillips-head screwdriver.
(There is not the projection lens fixing tap hole
on all the lenses.)
How to remove the projection
lens
Remove the “Lens fixing screw”.
1 )
Û
Remove the first screw on the right side of the
z
mark (orange) of the projection lens with a
Phillips-head screwdriver.
While holding down the “LOCK
2 )
button”, turn the projection lens
counterclockwise, and then pull it off.
Turn the projection lens counterclockwise until
z
its mark (orange) is aligned with the mark on
the projector ( on the left side of LOCK).
Some types of the lens do not have the projection lens fixing screw hole.
:
Û
Attention
Do not touch the lens signal receiver. Dust or dirt may cause defective contact.
z
Do not touch the surface of the projection lens with your bare hands.
z
Store the replaced lens where it will be free from vibration and impact.
z
Turn the projection lens counter clockwise to confirm that it does not come out.
z
LOCK button