Panasonic PT-F100NT User Manual

56

If JavaScript has been set to disable, enable it.

<Monitored information> window appears. (Next page)

• The default user mane and password settings are as follows: 

  User name: user1 (with user authority) / admin1 (administrator authority) 

  Password: panasonic (lower case)

• Administrator authority has full access to the all features. User authority has access to “monitor information”, “projector control” 

and “password change”. (User authority has no access to “Detailed setting”.)

• Password used in this page is for accessing the web control window. (See page 62)

  This password is different from the password set in page 51 for accessing a projector.

• The system locks for several minutes if an incorrect password is entered three times in succession.

• If you reset the configuration to the factory default or the state of purchase, the password is reset to “panasonic.” Change the 

password to an appropriate one.

• Make sure the password is as hard to guess as possible.

• Change the password periodically.

• If you have forgotten the password, perform [INITIALIZE] in the projector's network menu (See page 54), and set a new one in 

the “Password change” window of your WebBrowser. (See page 62)

• Panasonic Corporation and its affiliated companies never directly ask customers for their password.

  Do not give out your password even if directly asked by a third-party representing themselves as  

Panasonic Corporation.

• The top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Cmd] + 

[R] keys for example to update the screen.

• Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting.

• It may take some moments for WebBrowser to start up.

<Top window>

The WebBrowser starts up and the authentication window appears.