Panasonic PT-DW11KU User Manual
Chapter 4 Settings — [PROJECTOR SETUP] menu
118 - ENGLISH
[HDMI]
Sets the input to HDMI.
[SDI1]
*1
/[SDI]
*2
Sets the input to SDI/SDI1.
[SDI2]
*1
Sets the input to SDI2.
*1 Only for PT-DZ13KU, PT-DS12KU
*2 Only for PT-DZ10KU
*2 Only for PT-DZ10KU
[RS-232C]
Set the communication conditions of the <SERIAL IN>/<SERIAL OUT> terminal.
Setting the communication condition of the <SERIAL IN> terminal
1) Press as to select [RS-232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS-232C] screen is displayed.
3) Press as to select [(IN) BAUDRATE].
4) Press qw to switch the item.
4) Press qw to switch the item.
f
The items will switch each time you press the button.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
5) Press as to select [(IN) PARITY].
6) Press qw to switch the item.
6) Press qw to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the communication condition of the <SERIAL OUT> terminal
1) Press as to select [RS-232C].
2) Press the <ENTER> button.
2) Press the <ENTER> button.
f
The
[RS-232C] screen is displayed.
3) Press as to select [(OUT) BAUDRATE].
4) Press qw to switch the item.
4) Press qw to switch the item.
[9600]
Select the proper speed.
[19200]
[38400]
[38400]
5) Press as to select [(OUT) PARITY].
6) Press qw to switch the item.
6) Press qw to switch the item.
f
The items will switch each time you press the button.
[NONE]
Select the parity condition.
[EVEN]
[ODD]
Setting the response
1) Press as to select [RS-232C].