Panasonic PT-DW11KU User Manual
Chapter 4 Settings — [P IN P] menu
126 - ENGLISH
12) If [CLOCK PHASE] is selected in Step 6), press qw to make adjustment.
13) Press as to select [FRAME LOCK].
14) Press qw to switch the item.
13) Press as to select [FRAME LOCK].
14) Press qw to switch the item.
[MAIN WINDOW]
Set frame lock to the input signal set in the main window.
[SUB WINDOW]
Set frame lock to the input signal set in the sub window.
15) Press as to select [TYPE].
16) Press qw to switch the item.
16) Press qw to switch the item.
[MAIN WINDOW]
The main window has display priority.
[SUB WINDOW]
The sub window has display priority.
Note
f
The P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display
combination list” (x page 174) for details.
f
The main window setting values are applied to image adjustment values such as [PICTURE MODE], [GAMMA], and [COLOR
TEMPERATURE].
f
On the main screen (when no menu is displayed), press qw to switch the sizes and positions of the main window and sub window while P
IN P is operating.
f
When [FRAME RESPONSE] is set to other than [NORMAL], [P IN P] cannot be set.
f
3D images cannot be displayed in P IN P. (Only for PT-DZ13KU, PT-DS12KU, PT-DW11KU)
f
The P IN P state continues while the P IN P function is used, even if 3D images of the simultaneous system are displayed. (Only for
PT-DZ13KU, PT-DS12KU, PT-DW11KU)