Panasonic PT-D6000 User Manual

(Not available for PT-D5000)
When multiple projectors are used simultaneously, you can 
adjust the difference of the colours. Press I H to cycle 
through the options.

You can adjust 6 colours and register the result for each of 4 
types of signals, VIDEO, S-VIDEO, RGB and YP

/YC

.

(Not available for PT-D5000)
You can switch the contrast mode for operating environment.

J

Select the required screen format by pressing I H. The 
SCREEN FORMAT setting will affect on the ASPECT 
setting. See “ASPECT” on page 18.

J

You can change the displaying position of the projecting 
area. Press I H to adjust the value.

You can turn ON/OFF automatically detecting system of the 
AUTO SETUP feature.

Deactive.

Adjusting RGB gain of RED, GREEN, BLUE 
and WHITE. Press I H to change the value 
and switch ON/OFF the AUTO TEST 
PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)

Adjusting RGB gain of RED, GREEN, 
BLUE, CYAN, MAGENTA, YELLOW and 
WHITE. Press I H to change the value and 
switch ON/OFF the AUTO TEST PATTERN.
Setting range: 0 to +2048
(Setting value depends on your selected colours.)

Adjusting colours based on measured 
values using colorimeter. Input measured 
result in MEASURED DATA, and adjust in 
TARGET DATA. Press I H to change the 
value and switch ON/OFF the AUTO TEST 
PATTERN.
 

PICTURE MODE in PICTURE menu 
need to be set to DYNAMIC for using 
colorimeter.

• If the TARGET DATA is outside the colour range of the 

projector, the colours will not be projected correctly.

• When each colour option is selected while AUTO TEST 

PATTERN is activated, its one colour pattern will be displayed.

• Adjusting red gain of red colour changes its luminance, and 

likewise blue gain of blue and green gain of green.

• COLOR MATCHING adjustment should be carried out by a 

person who is familiar with the projector or by a service person 
because a high level of skill is required to make successful 
adjustment.

• Press the DEFAULT button to restore the factory default 

settings.

• AI, COLOR CORRECTION and COLOR TEMPERATURE are 

not available with COLOR MATCHING.

 

 

Deactive

Adjust 6 colours, RED, GREEN, 
BLUE, CYAN, MAGENTA and 
YELLOW.

Maximum brightness

Maximum contrast

*1

 H 16:9 H 4:3

*1. SCREEN POSITION is not available.

*1

 H 16:9

*1

 H 16:9

Setting range:
16:10

Not available.

-60 to +60

-160 to +160

Setting range:
16:10

Not available.

-40 to +40

Setting range:
4:3

Not available.

-96 to +96

Only when the AUTO SETUP button is 
pressed, the projected image position 
will be adjusted.

When the projector detects a 
COMPUTER or DVI signal, adjust the 
projected image position automatically.