Panasonic TH-LB30NT User Manual

55

Additionally perform the following setting using the [AUTHENTICATION] setting.

  When setting [OPEN] or [SHARED] as authentication and setting [WEP

※

] as the encryption method:

  DEFAULT KEY : Set 1 – 4 numerals for the default key.

  KEY 1 – 4 

: Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].

   

 

    Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit 

string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the 

hexadecimal format).

 When using [WPA-PSK

※

] or [WPA2-PSK

※

] : Set key and select [OK].

   

 

   Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

Important video/audio data is protected because AES

※

 encryption processing takes place in advance for all network numbers, 

even if [ENCRYPTION] is set to [NONE].

※ “Glossary” (See page 71)

The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the factory.

SSID 

: Panasonic Projector

DHCP 

: OFF

IP ADDRESS 

: 192.168.11.100

SUBNETMASK 

: 255.255.255.0

DEFAULT GATEWAY : 192.168.11.1
MODE 

: AD HOC

AUTHENTICATION  : OPEN
ENCRYPTION 

: NONE

CHANNEL 

: 11

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊