Panasonic PT-FW300NTU User Manual

When you start the projection for the first time, the minimum required setting screen for projection will be displayed.

J INITIAL SETTING

1. Select the required language setting by pressing 

I H, then press the ENTER button.

2. Select the minimum required settings to start the 

projection.

  Press the RETURN button to return to the language 

setting menu.

  Press 

F G to move through the menu items.

  Press 

I H to select the required setting.

  Press the ENTER button to complete the setting and 

start the projection.

Select the required installation method.

Select the required screen format by pressing 

I H.

  16:10

When project on a 16:10 or 4:3 
screen.

  16:9

When project on a 16:9 screen.

When SCREEN FORMAT menu is set to 16:9, you can 
select the menu display position by pressing 

I H.

  LOW

Displays the menu in the lower part 
of the screen.

  CENTER

Displays the menu in the middle of 
the screen.

  HIGH

Displays the menu in the upper part 
of the screen.

If you use the projector at high elevation, the HIGH 
ALTITUDE MODE setting need to be ON to set the fan 
speed high.

  OFF

The fan speed is low.

  ON

The fan speed is high.

INITIAL SETTING

ENGLISH

SELECT

ENTER

PLEASE SELECT LANGUAGE

INSTALLATION

INITIAL SETTING

FRONT/DESK

HIGH ALTITUDE MODE

OFF

SCREEN POSITION

CENTER

SCREEN FORMAT

16:10

SELECT

ENTER

RETURN

SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft).

Setting on a desk/floor and 
projecting from front

Mounting on the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting on the ceiling and 
projecting from rear

• At 1 400 - 2700 m (4 593 - 8 858 ft) above sea level, 

the setting must be ON.

• The loudness of fan noise depends on the HIGH 

ALTITUDE MODE setting.

  Once you finish the minimum requirement setting, it will not be displayed again unless the projector is 

  You can change the each setting from the main menu. See “Menu Navigation” on page 30.