Panasonic PT-FW300NTU User Manual

• Do not drop the remote control.
• Avoid contact with liquids or moisture.
• Use manganese batteries or alkaline batteries with the remote control.
• Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.
• Do not keep pressing the remote control buttons as this may shorten battery life.
• Do not point the laser in other people’s eyes or stare into beam.
• See “Remote control operation” on page 25.

Power button
While the MAIN POWER is 
on, switch between standby 
mode and projection mode. 
(page 21)

Project a laser pointer. 
(page 29)

Display the main menu. 
(page 32)

Navigate through the 
menus with 

FGIH, and 

activate the menu item 
with the ENTER button. 
(page 32)

Capture the projected image 
as a frozen picture. 
(page 27)

Reset some of the settings 
to the factory default 
settings. (page 27)

Assign the frequently use 
functions from the options 
for shortcut. (page 27)

Control to change the scale 
by means of digital zoom. 
(page 26)

Automatically adjust the 
setting of SHIFT, DOT 
CLOCK, CLOCK PHASE 
and SIGNAL SEARCH for 

the projected image of COMPUTER/
DVI signal. (page 25)

Switch the required input 
signal button to select.

Return to the previous menu. 
(page 32)

Turn off the projection 
temporarily. (page 27)

Display the frozen image 
while the display of 
subsequent images 

continues. (page 27)

Display 2 different source 
images at a time. 
(page 27)

Control to adjust the volume 
of the speaker. (page 29)

These buttons are for network control. See the contents of the 
provided CD-ROM for instructions. The COMPUTER 
SEARCH button is for PT-FW300NTU only.

Battery compartment
1. Press the tab and lift up the cover.
2. Insert the batteries according to the polarity diagram 

indicated inside.

Attaching a hand strap
You can attach a favorite 
strap on to the remote 
control.

Remote control signal 
emitters (page 25)

Laser pointer beam 
emitter (page 29)

Remote control indicator
Pressing any button except the LASER 
button, the remote control indicator will 
flash. Pressing the LASER button, it will 
lit.

(Shown as PT-FW300NTU)