Panasonic PT-FW300NTU User Manual
B
asi
c Op
eration
Switching the projector on/off
E
NGLISH - 22
The power indicator informs you the status of the power.
When the LAMP or TEMP indicator is flashing, you cannot switch on the power. See “TEMP, LAMP and FILTER
Power indicator
Indicator status
Status
No illumination or flashing
The MAIN POWER is switched off.
RED
Lit
The MAIN POWER is switched on and the projector is in standby mode.
When the LAMP or TEMP indicator is flashing, not available to switch on the power.
When the LAMP or TEMP indicator is flashing, not available to switch on the power.
Flashing
The power is switched off. (When NETWORK STANDBY in NETWORK menu or IN
STANDBY MODE of AUDIO SETTING in PROJECTOR SETUP menu is set to ON). Press
the power button to start the projection.
STANDBY MODE of AUDIO SETTING in PROJECTOR SETUP menu is set to ON). Press
the power button to start the projection.
GREEN
Flashing
The power is switched on and the projector is getting ready to project.
Lit
Projecting.
ORANGE
Lit
The power is switched off and the projector is cooling the lamp. The indicator will light or flash,
and start the projection after a short time.
and start the projection after a short time.
Flashing
The power is switched on again when cooling the lamp and recovering to projection mode.
NOTE:
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take
a while to start the projection.
• The electric consumption in standby mode is 4 W.
Power indicator