Panasonic PT-FW300NTU User Manual
E
NGLISH - 51
Maintenance
Troubleshooting
Should any problem persist, contact your dealer.
Problem
Cause
Reference
page
Power does not turn on.
The power cord may not be connected.
The MAIN POWER switch is turned off.
No electric supply is at the wall outlet.
TEMP indicator is lit or flashes.
LAMP indicator is lit or flashes.
The lamp unit cover has not been securely installed.
The circuit breakers have tripped.
The MAIN POWER switch is turned off.
No electric supply is at the wall outlet.
TEMP indicator is lit or flashes.
LAMP indicator is lit or flashes.
The lamp unit cover has not been securely installed.
The circuit breakers have tripped.
-
No picture appears.
The video signal input source may not be connected to a terminal
properly.
The input selection setting may not be correct.
The BRIGHTNESS adjustment setting may be at the minimum setting.
The AV MUTE function may be in use.
The BRIGHTNESS adjustment setting may be at the minimum setting.
The AV MUTE function may be in use.
The picture is fuzzy.
The lens focus may not have been set correctly.
The projector may not be at the correct distance from the screen.
The lens may be dirty.
The projector may be tilted too much.
The projector may not be at the correct distance from the screen.
The lens may be dirty.
The projector may be tilted too much.
The color is pale or grayish.
COLOR or TINT adjustment may be incorrect.
The input source which is connected to the projector may not be
The input source which is connected to the projector may not be
adjusted correctly.
No sound can be heard
from the internal speaker.
from the internal speaker.
The audio signal source may not be connected properly.
A cable may be connected to the VARIABLE AUDIO OUT terminal.
The volume adjustment may be at the lowest possible setting.
A cable may be connected to the VARIABLE AUDIO OUT terminal.
The volume adjustment may be at the lowest possible setting.
The control buttons of the
projector do not operate.
projector do not operate.
CONTROL PANEL
of
CONTROL DEVICE SETUP in SECURITY
menu is disabled. If you have a loss of the remote control while the
CONTROL PANEL is disabled, press and hold the MENU button for
2 seconds with pressing the ENTER button.
CONTROL PANEL is disabled, press and hold the MENU button for
2 seconds with pressing the ENTER button.
The remote control does
not operate.
not operate.
REMOTE CONTROLLER
of
CONTROL DEVICE SETUP in
SECURITY menu is disabled.
The batteries may be weak.
The batteries may not have been inserted correctly.
The remote control signal receptor on the projector may be
The batteries may not have been inserted correctly.
The remote control signal receptor on the projector may be
obstructed.
The remote control unit may be out of the operation range.
-
The picture does not
display correctly.
display correctly.
The signal format (TV-SYSTEM) may not have been set correctly.
There may be a problem with the VCR or other signal source.
A signal which is not compatible with the projector is being input.
There may be a problem with the VCR or other signal source.
A signal which is not compatible with the projector is being input.
-
Picture from a computer
does not appear.
does not appear.
The cable may be longer than the optional cable.
The external video output from a laptop computer may not be correct.
The external video output from a laptop computer may not be correct.
(You may be able to change the external output settings by pressing
the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
varies depending on the type of computer; refer to the documentation
provided with your computer for further details.)
the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method
varies depending on the type of computer; refer to the documentation
provided with your computer for further details.)
COMPUTER2 SELECT setting in PROJECTOR SETUP menu is not
correct.
-
Picture from a computer
DVI-D graphic board does
not appear.
DVI-D graphic board does
not appear.
The graphic board driver of the computer needs to be updated to the
latest version.
DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.
The computer may need to be restarted after switching DVI-D IN
setting in DISPLAY OPTION menu of the projector correctly.
-
-