Panasonic PT-FW300NTU User Manual

J Pin assignments and signal names

The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable 
provided with the projector is installed and attached to the bottom of the projector when mounting on the ceiling for 
safety and security.

J Installing the safety cable

1. Install the ceiling mount bracket according to the installation instructions.
2. Loop the security cable around the ceiling mount bracket with less slack.

  Lace the cable of the end with a latch through the loop on the other end of the cable.

3. Attach the latch on to the bottom of the projector with a provided screw.

  Torque: 1.25±0.2 N·m

* Indicated sample above is ET-PKF100S.

Pin No.

Pin No.

1

TMDS  Data  2-

13

2

TMDS  Data  2+

14

+5V

3

TMDS Data 2/4 
shield

15

GND

4

16

Hot Plug Detect

5

17

TMDS Data 0-

6

DDC clock

18

TMDS Data 0+

7

DDC data

19

TMDS Data 0/5 
shield

8

20

9

TMDS  Data  1-

21

10

TMDS Data 1+

22

TMDS clock shield

11

TMDS Data 1/3 
shield

23

TMDS clock+

12

24

TMDS clock-

• Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling 

mount bracket which is not purchased from an authorized distributors, or environmental conditions.

• Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
• Installation work of the ceiling mount bracket should only be carried by a qualified technician.
• Remove an unused ceiling mount bracket promptly.