Panasonic TQBJ 0268-5 User Manual

ENGLISH – 47

The automatic setup function can be used to 
automatically adjust the resolution, clock phase 
and picture position when analogue RGB signals 
consisting of bitmap images such as computer 
signals are being input, or to automatically adjust the 
picture position when DVI-D signals are being input. 
(The automatic setup function does not work with 
video format signals such as signals output from a 
DVD player.)
It is recommended to supply images with a bright 
white frame at the outermost periphery containing 
characters etc. that are clear in white and black 
contrast when the system is in automatic adjustment 
mode. Avoid supplying images that involve halftones 
or gradation such as photographs and computer 
graphics.

A message “COMPLETE” appears if 

• 

adjustment is ended normally.

“CLOCK PHASE” may have been shifted even 

• 

when the adjustment ended normally. In this case, 
manually adjust the “CLOCK PHASE”.

If an image with blurred edges or a dark 

• 

image is input, “INCOMPLETE” may appear or 
adjustment may not be performed properly even 
if “COMPLETE” appears. In this case, manually 
adjust the items of “INPUT RESOLUTION”, 
“CLOCK PHASE” and “SHIFT”.

For specific signals and long-sideways (or 

• 

landscape) signals such as 16:9, adjustment should 
be made according to “AUTO SETUP” in the option 
menu.

Automatic adjustment may not be available 

• 

depending on the machine type of the personal 
computer.

Automatic adjustment may not available for 

• 

synchronization signal of C-SYNC and G-SYNC.

Image may be distorted for several seconds during 

• 

automatic adjustment. This is not a malfunction.

For every supplied signal, adjustment is required.

• 

Automatic adjustment can be cancelled by pressing 

• 

the MENU button during the course of automatic 
adjustment.

Even for an RGB signal for which automatic setup 

• 

is possible, if automatic setup is performed while 
moving images are being input, “INCOMPLETE” 
may appear, or adjustment may not be performed 
properly even if “COMPLETE” appears.

Button illumination for the remote control can be 
turned on.

If no operations are carried out for approximately 

• 

10 seconds, button illumination will turn off 
automatically.

“DISABLE”, “P IN P” (pp. 83-84), “SUB MEMORY” 
(pp. 44-45), “SYSTEM SELECTOR” (pp. 56-57), or 
“FREEZE” (p. 81) operations can be assigned to the 
FUNC1 button on the remote control so that it can be 
used as an easy shortcut button.

Refer to “Setting FUNC1” for details. (p. 81)

• 

The projector has eight types of internal test patterns 
to check the condition of the set.
To display test patterns, follow the steps below.

Setting is also possible by using an on-screen 

• 

menu. Refer to “Displaying the internal test pattern” 
for details. (p. 85)

Results of adjustment on the image, picture quality, 

• 

position, size and other factors will not be reflected 
in test patterns. Be sure to display the input signal 
before performing various kinds of setting.