Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DS8500E
  5. User Manual

Panasonic PT-DS8500E User Manual

Download
Page of 129
DISPLAY OPTION menu
72
 - ENGLISH
Settings
 
J
Adjusting the position 
automatically
Select [POSITION ADJUST] in step 3).
1. 
Press ◄► to switch [POSITION 
2. 
ADJUST].
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
ON
OFF
Automatic adjustment is off.
ON
Screen position and size are 
adjusted during AUTO SETUP 
operation.
 
J
Adjusting the signal level 
automatically
Select [SIGNAL LEVEL ADJUST] in 
1. 
step 3).
Press ◄► to switch [SIGNAL LEVEL 
2. 
ADJUST].
The setting will change as follows each time 
 
z
◄► is pressed.
OFF
ON
OFF
Automatic adjustment is off.
ON
The black level (On-screen menu 
[BRIGHTNESS]) and white level 
(On-screen menu [CONTRAST]) 
are adjusted during AUTO SETUP 
operation.
Note
If the input image is not a still image with a clear 
 
z
difference between black and white, the [SIGNAL LEVEL 
ADJUST] function may not operate normally.
RGB IN
 (Only RGB input)
Change this setting to change the input impedance of 
the synchronous signal input.
Press ▲▼ to select [RGB IN].
1 ) 
Press <ENTER> button.
2 ) 
The [
 
z
RGB IN] screen will be displayed.
Press ▲▼ to select [RGB1 SYNC 
3 ) 
TERMINAL] or [RGB2 SYNC 
TERMINAL].
Press ◄► to switch.
4 ) 
The setting will change as follows each time 
 
z
◄► is pressed.
LOW
HIGH
LOW
Input impedance is set to [LOW].
HIGH
Input impedance is set to [HIGH].
DVI-D IN
Change this setting if video does not display normally 
when the projector and an external device are 
connected via DVI.
Press ▲▼ to select [DVI-D IN].
1 ) 
Press <ENTER> button.
2 ) 
The [
 
z
DVI-D IN] screen will be displayed.
Press ▲▼ to select [DVI EDID].
3 ) 
Press ◄► to switch [DVI EDID].
4 ) 
The setting will change as follows each time 
 
z
◄► is pressed.
EDID3
EDID1
EDID2 : PC
EDID3
Switch between fine settings for a 
moving image and for a still image.
EDID1
Mainly select this when an external 
device (DVD player, etc.) for 
outputting video signals of a moving 
image system is connected to DVI-D 
IN.
EDID2 : PC
Mainly use this when an external 
device (PC, etc.) for outputting video 
signals of a still image system is 
connected to DVI-D IN.
Press ▲▼ to select [DVI SIGNAL 
5 ) 
LEVEL].