Panasonic TQBJ0302 User Manual

Before cleaning, be sure to turn off the power and disconnect the power plug from the wall outlet. 

 

z

Be sure to turn off the power as described in “Switching off the projector”. 

 

z

J

Wipe off dirt and dust gently with a soft cloth.

If it is difficult to remove the dirt, soak a cloth with water, wring the cloth well and then wipe the projector. 

 

z

Dry off the projector with dry cloth.

Do not use petroleum benzine, thinner, any alcoholic solvent, kitchen detergents or chemical clothes. 

 

z

Failure to observe these may result in altered or damaged surfaces of the projector.

J

Make sure no dirt or dust remains on the surface of the lens cover glass. It will be enlarged and projected onto 

the screen. 

Wipe off dirt and dust gently with a lint-free cloth. Do not wipe the lens cover with a cloth which has collected 

dust.

Clean the lens cover with special care. Giving a shock may cause serious damage.

 

z

J

If the air filter is excessively dirty, the internal temperature of the projector increases, the 

TEMP indicator 

lights, and the power is turned off. If the power is turned off, the 

TEMP indicator flashes. Clean the air filter 

regularly every 100 hours of usage.

Place the projector softly so that it will not be 

 

z

damaged.

Press the tab and slightly slide up the air filter to 

 

z

remove.

Tab

Air filter

Vacuum dirt and dust from the air filter.

Do not use the projector without attaching the air filter. Otherwise, it will suck in dirt and dust which can cause 

 

z

malfunction.