Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TQBJ0349
  5. User Manual

Panasonic TQBJ0349 User Manual

Download
Page of 95
Basic operations using the remote control
ENGLISH - 
37
Basic Operation
Automatic adjustment
The automatic setup function can be used to 
automatically adjust the resolution, clock phase and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright 
white frame at the outermost periphery containing 
characters etc. that are clear in white and black 
contrast when the system is in automatic adjustment 
mode.
Avoid supplying images that involve halftones 
or gradation such as photographs and computer 
graphics.
 button
Press <AUTO SETUP> button on the 
remote control or the main unit.
A message [COMPLETE] appears if adjustment is 
 
z
ended normally.
Note
[CLOCK PHASE] may have been shifted even when the 
 
z
adjustment ended normally. In this case, manually adjust 
the [CLOCK PHASE].
(
Æ
page 49) for details.
If an image with blurred edges or a dark image is input, 
 
z
[INCOMPLETE] may appear or adjustment may not 
be performed properly even if [COMPLETE] appears. 
Æ
(
Æ
For specific signals, adjustment should be made 
 
z
Æ
page 56).
[AUTO SETUP] may not be available depending on the 
 
z
machine type of the personal computer.
Automatic adjustment may not available for 
 
z
synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during 
 
z
automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.
 
z
Automatic adjustment can be canceled by pressing 
 
z
<MENU> button during the course of automatic 
adjustment.
Even for an RGB signal for which automatic setup is 
 
z
possible, if automatic setup is performed while moving 
images are being input, [INCOMPLETE] may appear, 
or adjustment may not be performed properly even if 
[COMPLETE] appears.
Using the function buttons
Three function buttons (<FUNCTION1 to 3>) on the 
remote control and the <FUNCTION1> button on the 
projector can be assigned to any frequent operations. 
They can be used as a useful shortcut button.
 buttons
Press any of the <FUNCTION1 to 3> 
1 ) 
buttons on the remote control or the 
<FUNCTION1> button on the projector.
Press <MENU> button on the remote 
2 ) 
control or the projector to select a 
menu option (Main Menu, Submenu or 
Advanced Menu).
For the on-screen menu selection, see 
 
z
Æ
Hold down any of the <FUNCTION1 
3 ) 
to 3> buttons on the remote control 
or the <FUNCTION1> button on the 
projector more than 3 seconds.
Note
For details, see 
 
z
Æ
page 66)
Using ECO button
Displays [ECO MANAGEMENT] menu.
 button
Press <ECO> button on the remote 
control.
Note
For details, see 
 
z
Æ
page 63)