Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. TQBJ0349
  5. User Manual

Panasonic TQBJ0349 User Manual

Download
Page of 95
PICTURE menu
46
 - ENGLISH
Settings
SYSTEM SELECTOR
This enables the projector to automatically recognize 
input signals. Furthermore, if unstable signals are 
input, the system format can be selected manually.
Press ▲▼ to select [SYSTEM 
1 ) 
SELECTOR].
Press <ENTER> button.
2 ) 
Press ▲▼ to switch [SYSTEM 
3 ) 
SELECTOR].
Press <ENTER> button.
4 ) 
 
J
VIDEO/S-VIDEO terminal input 
signal
Select from AUTO, NTSC, NTSC4.43, PAL, 
PAL-M, PAL-N, SECAM, and PAL60.
Attention
[AUTO] mode is selected by default.
 
z
When the projector is not working properly in [AUTO] 
 
z
mode, change the setting according to each SYSTEM 
SELECTOR type.
Note
[AUTO] automatically selects from NTSC, NTSC4.43, 
 
z
PAL, PAL-M, PAL-N, SECAM, and PAL60.
 
J
RGB1/RGB2 terminal input signal
480i, 576i, 576p signals
 
z
Select from RGB and YC
B
C
R
.
VGA60, 480p signals
 
z
Select from VGA60, 480p, and 480pRGB.
Other signals
 
z
Select from RGB and YP
B
P
R
.
Note
Refer to 
 
z
Æ
available signals.
 
J
DVI-D terminal input signal
480p, 576p signals
 
z
Select from RGB and YC
B
C
R
.
Other signals
 
z
Select from RGB and YP
B
P
R
.
Note
Refer to 
 
z
Æ
available signals.
Malfunction may occur or other problems could be 
 
z
encountered with some equipment.
 
J
HDMI terminal input signal
480p, 576p signals
 
z
Select from Auto, RGB, and YC
B
C
R
.
Other signals
 
z
Select from Auto, RGB, and YP
B
P
R
Note
Refer to 
 
z
Æ
available signals.
Malfunction may occur or other problems could be 
 
z
encountered with some equipment.
To display pictures complying 
with the sRGB standard
sRGB is the international color reproduction standard 
(IEC61966-2-1) established by IEC (International 
Electrotechnical Commission).
To reproduce colors more faithfully in compliance 
with the sRGB standard, perform the following setting 
procedure.
Set [COLOR MATCHING], [COLOR 
1 ) 
COLLECTION] adjustment to [OFF].
 
z
Æ
page 53).
 
z
Æ
page 54).
Display the [PICTURE] screen.
2 ) 
 
z
Æ
page 42).
Press ▲▼ to select [PICTURE MODE].
3 ) 
Press ◄► to select [NATURAL].
4 ) 
Press ▲▼ to select [COLOR].
5 ) 
Press <DEFAULT> button on the 
6 ) 
remote control to restore the factory 
default.
Follow the same procedure (steps 
7 ) 
5-6) to restore the factory default for 
[TINT], [COLOR TEMPERATURE] and 
[GAMMA].
Note
sRGB is only enable when RGB signals are being input.
 
z