Panasonic PT-FW300U User Manual
Settings
POSITION menu
E
NGLISH - 36
You can switch the aspect ratio manually when needed.
Press
Press
I H to cycle through the options.
J Aspect ratio options
Q AUTO
Signals which contains an identifying aspect signal
will be detected and automatically project the
image in proper ratio. (NTSC and 525i (480i)
signals only)
will be detected and automatically project the
image in proper ratio. (NTSC and 525i (480i)
signals only)
Q 4:3
When a 4:3 or 5:4 signal is detected, the image will
be projected without any change, and other signals
will be adjusted to 4:3 with preserving original ratio.
be projected without any change, and other signals
will be adjusted to 4:3 with preserving original ratio.
Q 16:9
When a 16:10, 16:9 or 15:9 signal is detected, the
image will be projected without any change, and
other signals will be adjusted to 16:9.
image will be projected without any change, and
other signals will be adjusted to 16:9.
Q H-FIT
The 4:3/5:4 image will be stretched to the
horizontal limit of the SCREEN FORMAT setting
size with preserving original ratio and the vertical
edge will be cropped.
horizontal limit of the SCREEN FORMAT setting
size with preserving original ratio and the vertical
edge will be cropped.
Q V-FIT
The 16:9 (16:10)/15:9 image will be stretched to
the vertical limit of the SCREEN FORMAT setting
size with preserving original ratio and the
horizontal edge will be cropped.
the vertical limit of the SCREEN FORMAT setting
size with preserving original ratio and the
horizontal edge will be cropped.
Q HV-FIT
The image will be stretched to the vertical and
horizontal limit of the SCREEN FORMAT setting
size without preserving original ratio and the
vertical and horizontal edge will not be cropped.
horizontal limit of the SCREEN FORMAT setting
size without preserving original ratio and the
vertical and horizontal edge will not be cropped.
Q THROUGH
The image will be projected without any size
adjustment.
adjustment.
ASPECT