Panasonic PT-L712NTE User Manual

-27-

Setting up the computer wireless

card

When using an optional ET-CDWL1 series wireless card, it must be
installed to a computer and the driver software and Configuration Utility
must be installed into the computer.

This section describes the method of setting up the optional

ET-CDWL1 series wireless card.

If you have already set up your computer’s wireless card, you

can skip to “Using the Wireless Manager” on page

Setup procedure

Carry out the following steps in the order given to set up the computer’s
wireless card.

Install the
card.
(Page

)

Install the
driver.
(Page

)

Install the
utilities.
(Page

)

Use

Wireless

manager to
make
network
settings.
(Page

)

Installing and removing the computer’s
wireless card

Installing the wireless card

Hold the wireless card so that the power monitor is facing upward, and
insert it into the computer’s PC card slot as far as it will go. Make sure that
the card is facing the right way.

Computer

Wireless

card

Note:

• Read the documentation provided with the computer at this time also.

• If you try to force the wireless card the wrong way into the slot, it will

damage the wireless card and the projector.