Panasonic PT-FX400U User Manual

After selecting the item, press ◄► to set.

 

z

Remote Control

Control Panel

You can switch to the desired picture mode suitable 

for the image source and the environment in which 

the projector is used.

The [PICTURE MODE] screen appears. 

 

z

The setting will change as follows each time 

 

z

you press the button.

During video input

*1 : 

During still image input

*2 : 

For viewing at normal brightness 

For viewing at higher brightness 

and sharpness

BLACKBOARD For projection on a blackboard
WHITE BOARD For projection on a whiteboard

For natural reproduction of film 

sources

For reproduction in a dark room

The factory default picture mode settings are [DYNAMIC] 

 

z

for still images and [STANDARD] for video. 

It may take a few seconds for the picture to stabilize after 

 

z

a picture mode change. 

You can adjust the contrast of the colors.

The [CONTRAST] screen will be displayed.

 

z

Press ►.

Brightens the screen 

and makes the color 

of image deeper.

Maximum 

value +32

Press ◄.

Darkens the screen 

and makes the color 

of image lighter.

Minimum 

value -32

Adjust the BRIGHTNESS in advance if necessary.

 

z

You can adjust the dark (black) parts of the projected 

image.

The [BRIGHTNESS] screen will be displayed.

 

z

Press ►.

Increases the 

brightness of the 

dark (black) parts of 

the screen.

Maximum 

value +32

Press ◄.

Reduces the 

brightness of the 

dark (black) parts of 

the screen.

Minimum 

value -32